The products here are part of DADISICK's brand product line, which is independently developed, manufactured, and sold.
We provide stable, high-quality products and ensure fast delivery.
Categories | OX-D2/OX-D3 Series |
---|---|
Brand | DADISICK |
Model | OX-D2 & OX-D3 | OX-D3-3C |
Full range of gold-plated contacts: | Configure 5 contact structures |
Suitable for standard and small loads: | Adjust up to 8 directional key operation holes |
Certification: | GB14048.5-2017, IEC/EN60947-5-1 |
Contact type: | 3NC |
Update Time | Dec 31,2024 |
Performance Specifications
|
||
Applicable standard
|
IEC/EN60947-5-1/GB14048.5-2017 |
|
Protection level*1
|
IP65/IP67 (EN60947-5-1 key operation hole) |
|
Service life*2
|
More than 1 million machinery/more than 300,000 times of electricity |
|
Rated insulation voltage (Ui)
|
400V |
|
Rated impulse withstand voltage (Uimp) | 4KV | |
Rated open thermal current (Ith) | 8A | |
Use category | AC-15 | |
Rated working voltage (Ue) | AC400V | |
Rated operating current (le) | 2A | |
Rated limited short-circuit current | 1000A | |
forced disengagement force | ≥60N | |
Forced breakaway distance | ≥10mm | |
Operating frequency | ≤ 20 times/minute | |
Ambient temperature | -20°C~60°C (not freezing) | |
Environment humidity | Below85%RH | |
1. The above values are initial values. 2. The contacts of the switch are shared by standard and small loads, but the contacts that operate on a certain load cannot be connected to a load with a smaller capacity for use. Failure to do so may result in damage to the contact surface and reduced contact reliability. 3. Although the switch housing can prevent dust or water from entering, do not use the switch where foreign matter such as powder, water or medicine may enter the keyhole of the switch head, otherwise wear, damage or malfunction of the switch may occur. 4.The conditions for durability are an ambient temperature of 5°C to 35°C and an ambient humidity of 40% to 70%. |