Technology-Leading Manufacturer Of Industrial Automation Safety Sensors

DownloadCertificate
Language:
 English
Home / All / Safety Products /

Warehouse and Logistics Automation

Warehouse and Logistics Automation

Optical Data Transmission Module

Optical Data Transmission Module ST100 series

What is Optical Data Transmission?

The ST100 Series Optical Data Transmission Sensor is an optical data transmission module that uses spatial light as the transmission medium. Its core components include optics, mechanics, circuitry, and software systems. During operation, the sensor converts the data stream from the host computer into laser pulse signals, which are emitted outward by the laser emitter. These laser pulses propagate through free space to the receiver. The receiver detects the incoming light signals, converts them into electrical signals, and transmits the data stream back to the host computer. This process enables efficient data transmission.

Optical Link Characteristics

The ST100 Series Optical Data Transmission Sensor uses infrared lasers for data transmission, employing two laser wavelengths: 785nm and 850nm, for mutual data interaction. The original spot size of each laser is approximately 5mm, with a beam divergence angle of 1°, and the corresponding receiver field of view angle is 1.5°.

Main Applications

The ST100 Series Optical Data Transmission Sensor utilizes optical transmission technology, eliminating the need for physical data transmission cables. As a result, it is particularly suitable for environments where the use of cables is impractical, such as in confined spaces or complex environments. Its main applications include: smart warehousing, overhead cranes, reciprocating transport systems, port automation, stacker cranes, rail cars, and more.
Solution for Positioning tasks on stacker cranes in a high-bay warehouse
Solution for Optical positioning sensors on lift systems
Solution for Lifting positions of corridor conveyors
Solution for port automation

ST100 Series and DS Series Interference-Free Parallel Operation

As storage and retrieval systems increasingly rely on dynamic calculation of position data, pre-calculated position drives can be optimized for high speed or low power consumption, depending on throughput requirements.

The ST100 Series laser-based broadband data transmission module provides additional benefits by offering parallel real-time images from aisles for position data. This aids in fault analysis and correction, as well as system optimization. DADISICK's new ST100 Series Optical Data Transmission Module enables protocol-free, high-speed Ethernet communication with bandwidth up to 100 Mbit/s, making it ideal for internal logistics applications. The module also offers diagnostic capabilities via a display and digital outputs, providing a comprehensive solution for fast debugging and high operational availability.

This module is suitable for wireless data transmission to storage and retrieval devices in automatic high-bay warehouses or transfer vehicles. With a bandwidth of 100 Mbit/s, it can handle large amounts of data, such as diagnostic data generated by cameras installed on storage and retrieval devices for monitoring purposes. When combined with the DS Series Long Distance Laser Ranging Sensor, it offers enhanced functionality.

The ST100 Series Optical Data Transmission Module and DS Series Long Distance Optical Distance Sensors form a powerful suite for linear positioning, offering advanced and investment-secure positioning solutions for storage and retrieval systems from a single source. The 100 Mbit/s high Ethernet data transmission bandwidth enables the implementation of additional availability optimization options.
Diagram Description：
① Distance Sensor
② Reflector Plate
H (Minimum Distance)
Smax (Maximum Travel Distance)
③ ST100 Device No.1
④ ST100 Device No.2

DS Series Long-Distance Laser Rangefinder

Long-Distance Laser Rangefinder Function of the DS Series

The DS Series Long Distance Laser Rangender consists of a laser emitter, an optical receiving device, and an internal processing circuit and software system. The sensor emits a laser beam, which is reflected by a reflector and received by the optical receiving device. The built-in evaluation and measurement unit uses the Time of Flight (TOF) method with phase correlation to accurately calculate the distance between the sensor and the reflector. During the measurement, the reflector or equipment can move linearly along the laser beam path, and the sensor continuously tracks and calculates the distance. The measurement results are transmitted through a data interface.
Long Distance Laser Rangender DS series

Optical Distance Sensors Products List

Optical Data Transmission Module
Optical Data Transmission Module ST100 Series
Models
 ST100-80E3
ST100-120E3
ST100-200E3
Effective transmission distance
 80m
120m
 200m
 Communication rate
100Mbit/s
 Communication light divergence angle
1°
 Communication light receiving angle
1.5°
 Power supply voltage
 DC 10V-30V
 Power consumption
 3W (max)
 Data transmission interface
Ethernet
 Protection level
IP65
 Dimensions
 102 * 84 * 140.5 mm
Optical Data Transmission Module
Laser Measurement Sensor DS Series
Models
 DS-80
DS-120
 DS-200
 Measurement range
80m
120m
200m
Measurement accuracy
±2 mm
 Repeat accuracy
1 mm
 Measurement frequency
1000 Hz
Measurement resolution
0.1mm
Maximum movement rate
15 m/s
Power supply voltage
DC 9V...30V
Power consumption
2.4W(Max)
 Data transmission interface
SSl、Ethernet 100BASE-TX
DADISICK specializes in providing advanced sensor solutions for automation systems in warehouses, ports, and docks. Our sensors are widely used in mobile equipment such as AMRs, AGVs, RTGs, and bridge/gantry cranes, as well as in automation systems like AS/RS. With precise navigation and positioning, reliable obstacle detection, efficient data transmission, and comprehensive safety protection, DADISICK sensors significantly enhance system performance and safety, enabling more efficient material handling. Whether for forklifts, autonomous vehicles, or semi-autonomous vehicles, we offer tailored sensor solutions to meet a wide range of application needs.
Image

Warehouse and Logistics Automation

ModelDescription
ST100-200E3 | Optical Data Transmission Module ST100 SeriesST100-200E3 | Optical Data Transmission Module ST100 SeriesST100 Series | ST100-200E3Eective transmission distance: 200 m
Communication rate: 100 Mbit/s
Communication light divergence angle: 1°
Communication light receiving angle: 1.5°
ST100-120E3 | Optical Data Transmission Module ST100 SeriesST100-120E3 | Optical Data Transmission Module ST100 SeriesST100 Series | ST100-120E3Eective transmission distance: 120 m
Communication rate: 100 Mbit/s
Communication light divergence angle: 1°
Communication light receiving angle: 1.5°
ST100-80E3 | Optical Data Transmission Module ST100 SeriesST100-80E3 | Optical Data Transmission Module ST100 SeriesST100 Series | ST100-80E3Eective transmission distance: 80 m
Communication rate: 100 Mbit/s
Communication light divergence angle: 1°
Communication light receiving angle: 1.5°
DS-200 | Laser Measurement Sensor | DADISICKDS-200 | Laser Measurement Sensor | DADISICKDS Series | DS-200Measuring frequency: 1000Hz
Data transmission interface: SSl, Ethernet 100 BASE-TX
Measuring distance: 200m
Measurement accuracy: ±2 mm
DS-120 | Laser Measurement Sensor | DADISICKDS-120 | Laser Measurement Sensor | DADISICKDS Series | DS-120Measuring frequency: 1000Hz
Data transmission interface: SSl, Ethernet 100 BASE-TX
Measuring distance: 120m
Measurement accuracy: ±2 mm
DS-80 | Distance Sensor High Precision Sensor | DADISICKDS-80 | Distance Sensor High Precision Sensor | DADISICKDS Series | DS-80Measuring frequency: 1000Hz
Data transmission interface: SSl, Ethernet 100 BASE-TX
Measuring distance: 80m
Measurement accuracy: ±2 mm

FAQ

Can the DS Series Laser Distance Sensors be used in parallel with Optical Data Transmission Modules?
Yes, the DS Series Laser Distance Sensors can operate in parallel with the ST100 Series Optical Data Transmission Modules without interference. This combination is ideal for automated warehousing or port systems, providing both precise positioning and stable data transmission.
What data bandwidth does the Optical Data Transmission Module support?
The ST100 Series Module supports 100 Mbit/s high-speed Ethernet communication, meeting the requirements of large data transmission, such as real-time video streams and diagnostic data.
Does the ST100 Series Module support bidirectional communication?
Yes, the ST100 Series Optical Data Transmission Module supports bidirectional data communication, allowing for simultaneous data transmission and reception to ensure real-time and efficient information exchange.
 Does the reflectivity of the target surface affect the measurement results in long-distance laser measurement sensors?
Yes, the reflectivity of the target surface has a certain impact on measurement performance:
▪️High-reflectivity surfaces (e.g., reflective panels or white objects): Provide optimal measurement performance.
▪️Low-reflectivity surfaces (e.g., black objects): The effective measurement distance may be reduced, but the sensor can compensate through adjustable laser power or enhanced algorithms.

Related Products

Photoelectric Sensors Retro-reflective Sensors GM18 Series
Photoelectric Sensors Retro-reflective Sensors GM18 Series
Detection range: 2000 mm, 3000 mm Material: Nickel-copper alloy Connection type: 3pin/4pin with 2M cable
Universal Square Photoelectric Sensor GF43 Series
Universal Square Photoelectric Sensor GF43 Series
Detection distance: 30-150mm, 2M, 10M Power supply voltage: DC12-24V No-load current：9mA , 9mA, Reflection 11mA, reception 9mA Connection method：Wire lead type (standard wire length 2m)
Laser measurement distance｜Laser Ranging Sensor｜DADISICK
Laser measurement distance｜Laser Ranging Sensor｜DADISICK
Output method: NPN/PNP+analog+RS485 Resolution: 1mm Laser type: red semiconductor laser Class II laser 655+10nm<1m Reaction time: 50-200ms Measure distance: 0.1-50m
Laser measurement distance｜Laser Ranging Sensor｜DADISICK
Laser measurement distance｜Laser Ranging Sensor｜DADISICK
By converting from the laser into electrical signals. determine various characteristics,distance, displacement, or position.
Photoelectric Sensors Through-beam Sensors GM18 Series
Photoelectric Sensors Through-beam Sensors GM18 Series
Detection range: 5000 mm, 15000 mm Material: Nickel-copper alloy Connection type: 3pin/4pin with 2M cable
KeyWords

Ask DADISICK

Hello! You've come to the right place to get answers about our products and solutions.In addition to DADISICK's own range of over 2000 products, we also offer a wide range of branded replacement products to meet your specific requirements.Our sales engineers are ready to provide comprehensive support at all levels of the business, from the design and research phase to model selection, on-site guidance and production line operation after product adoption. Use the form below to ask us about your needs and we will contact you as soon as possible .
  • Ask DADISICK
    • *Email
      Name
Get Your Free Automated Safety Sensor Solution

Since 2006, DADISICK has led industrial automation safety tech globally. We specialize in smart sensor solutions, prioritizing safety, efficiency, and innovation.MORE

TÜV Certificate / RoHS Certificate / ISO Certificate

DADISICK

Product

Projects

Support

Language:
 English
About UsNewsContactFAQsPrivacy NoticeTerms & Conditions
Copyright © 2025 Dongguan Dadi Electronic Technology Co., Ltd