Technology-Leading Manufacturer Of Industrial Automation Safety Sensors

Home / All / Safety Products / Safety Light Curtains / The wide scanning range light curtain QT series /

QT54-10-530-2BB|punch press safety guards|DADISICK

QT54-10-530-2BB|punch press safety guards|DADISICK
QT54-10-530-2BB|punch press safety guards|DADISICKQT54-10-530-2BB|punch press safety guards|DADISICKQT54-10-530-2BB|punch press safety guards|DADISICKQT54-10-530-2BB|punch press safety guards|DADISICKQT54-10-530-2BB|punch press safety guards|DADISICK

QT54-10-530-2BB|punch press safety guards|DADISICK

CategoriesThe wide scanning range light curtain QT series
BrandDADISICK
ModelQT54-10-530-2BB
Factory packaging1 Receiver and 1Emitter accessories, cable
Detection distance:0.3-6M;0.3-45M
Beam spacing:10mm
Number of optical axes:54
Protection height:530mm
2 Safety outputs (OSSD)2 PNP
Interface plugEquipped with M16 connector
Product comes:with mounting accessories
Certification:TUV,UL,CE,RoSH,GB
Update TimeNov 24,2024
Detail Information
Product model
Standard configuration
QT series punch press safety guards
Punch press safety guards form
One receiver, one transmitter, two data lines, one right-angle rack, and one t-shaped screw
Application
Infrared radiation type
Standard packaging
Standard industrial environment
Features
Resolution ratio
10mm
Check the accuracy
18mm
Number of beams
54
Pretection height 
530mm
Overall dimension
51mm*35mm*L,L is the length of emitter and receiver. 
Detection distance
30-6000mm;30-45000mm
Response time
≤15ms
Mechanical data
Housing material
Housing material
Metal shell
Aluminium
Lens front screen material
Acrylic
Upper and lower cover materials
ABS reinforced nylon PA66+30% GF
Synchronization
Consumption current
≤200mA
Output mode
2  PNP, with current of 500mA and voltage below 1.5V, polarity, short circuit and over-cutting protection
Output status
ON (receiving indicator green light)
Indicator light
Transmitter: power indicator light (red); receiver: output indicator light on (green), blackout (red)
Wavelength
850nm
Type of light
Infrared light (NIR), invisible
Function
Automatic reset
Synchronization
Line synchronization
Performance data
Protection circuit
Short circuit protection
Supply voltage
Overvoltage protection
Maximum current consumption
24VDC,-20...20%
Fuse
150mA
Environmental data
Protection grade
IP65
Resistance to ambient light
Incandescent light: illumination of light-receiving surface 3000Lx; Sunlight: illumination of light-receiving surface 10000Lx
Ambient temperature
Working temperature: - 10~+40 ℃ (but not frozen), storage temperature: - 25 -+55 ℃
Ambient humidity
Working time: 35~85% RH, saving time: 35~95% RH
Output
Number of safe output circuits (OSSD)
2-circuit
Type
Safety circuit output circuit OSSD
Minimum switch voltage high
18V
Minimum switch voltage low
2.5V
Typical switching voltage
22.5V
Voltage type
DC
Maximum current load
380mA
Load inductance
two thousand
Load capacity
zero point three
Maximum residual current
0.2mA
Typical residual current
0.002MA
Voltage drop
1.5V
Safety switch output 1
Connection pin 4, WHITE OSSD1
Switching element
Transistor PNP
Safety switch output 2
Connection pin 5, GREEN OSSD2
Switching element
Transistor PNP
Electrical interface
Number of interfaces
2 (receiver and transmitter)
Type
M16 connector, 7-pin
Interface metal
Copper nickel plating
Plug material
kirsite
Rated current (A)
5A
Contact DC(AC V)
Φ1*5
working voltage (AC V)
500V
pressurization (AC V)
1500V
contact resistance
5MΩ
insulation resistance
2000MΩ
Allowable typical conductor section
0.25m㎡
Maximum link cable
100M
Maximum allowable carrying current
4.9A
Cable material
PVC
Shielding
shielded
Safety light curtain QT series  accessories for QCA-05 Side bracket
The rotating bracket allows the light curtain to rotate around its longitudinal axis and adjust its position
Safety light curtain QT series  accessories for QCA-02  T-shaped card slot
It can be directly put into the aluminum groove, in the process of installation, it can automatically locate and lock.
Safety light curtain  QT series accessories for QCA-03-Convex groove
Convex groove function:high production efficiency, good heat dissipation, easy to use and maintenance.
Safety light curtain QT series accessories for QA-02 swivel fastening brackets
Mainly used in the safety light curtain, not only solid installation and good shock resistance can be rotated Angle
Safety light curtain  QT series accessories for QA-01 swivel fastening brackets
Mainly used in the safety light curtain, not only solid installation and good shock resistance can be rotated Angle
Safety light curtain  QT series accessories for QCA-01 Column stainless steel bracket
The safety light curtain are fixed on support,and then debug according to the specific situation.
Controller QET
Controller QET for Dadisick Safety Light Curtains
Safety Relay QRSN
safety relay for Dadisick Safety Light Curtains
punch press safety guards Cable description
Safety Light Curtain Cable Description
signal output selection (actual output of transistor working normally)
Safety Light Curtain Signal Output Selection
NPN output wiring diagram
Safety Light Curtain NPN Output Wiring Diagram
PNP output wiring diagram
Safety Light Curtain PNP Output Wiring Diagram
Dimension
Safety Light Curtain Dimension

Safety-light-curtain QT Series User Manual

Safety-light-curtain QT Series-data sheet

QT54-10-530-2BB.3D-STEP

Review
  • Loading...

Becoming a DADISICK sales and service partner and resell our products in your country!

These partners are supported by DADISICK with the latest training, tools, knowledge, information and support. please complete this short form.
*Email
Name
*Title
*Content
Upload
  • Only supports .rar/.zip/.jpg/.png/.gif/.doc/.xls/.pdf, maximum 20MB.