How to Choose a Safety Mat? Comprehensive Guide to Selecting Industrial Safety Mat
Clarify the Scenarios and Requirements of Safety Mat
1. Identify the work environment
First of all, it is necessary to clarify the industrial environment in which the safety mat, will be used, such as around mechanical equipment, at the entrance of the safety passage, at the bottom of the lifting platform, etc. Different environments have different requirements for the wear resistance, slip resistance, oil resistance, etc. of the safety mat.
2. Analyze functional requirements
Based on the application scenario, analyze the specific functional requirements of the safety carpet. For example, is it necessary to have a step trigger function to control the start/stop of the equipment? Are special properties such as fire and corrosion resistance required? These requirements will directly affect the selection of the safety mat sensor.
Consider Materials and Durability of Safety Mat
1. Material Selection
The key is to select durable materials that meet safety requirements. Rubber materials are the first choice for industrial safety mat switches because of their good resistance to wear, compression and chemical corrosion. In particular, nitrile rubber, special load-bearing rubber EPM/EPDM materials and heavy-duty PVC plastics are waterproof, oil-resistant, resistant to high-temperature welding slag, have wheel rolling resistance and impact-resistant steel plate construction, which are suitable for most industrial environments.
2. Durability Evaluation
Evaluate the tensile and tear strength of the pressure-sensitive mat to ensure that it can withstand physical impact in the industrial environment without being easily damaged. At the same time, check that the edges of the pressure-sensitive safety mat are flat to avoid the risk of tripping due to edge distortion.
Attention to Detail and Safety Performance of Safety Mat
1. Circuit Design
The circuit layout should be reasonable, avoid crossing or clutter, and ensure waterproof and dustproof design to prevent short circuit or failure. The inside of the safety mat should be full of switch sensing components, which must have high wear resistance and anti-interference performance to ensure timely and accurate response to pressure changes.
2. Insulation and Resistance
Ensure that the safety carpet does not pose a risk of electric shock to the human body when it is switched on. Check whether the resistivity and insulation of the safety mat sensor meet safety standards to prevent electric shock accidents caused by leakage.
3. Fire Resistance
For industrial environments where flammable substances may be present, safety mat switch must have good fire resistance. Choose pressure-sensitive mat with flame-retardant materials to reduce the risk of fire.
Brand and Quality Control of Safety Mat
1. Brand Reputation
Choose a well-known brand and a reputable safety mat manufacturer to ensure the quality of the product and after-sales service. By checking brand rankings, customer reviews, and other information, you can better understand the performance and reputation of the product.
2. Quality Inspection Standards
Understand whether the manufacturer follows relevant international or domestic quality inspection standards, such as ISO, CE, etc. Ask the manufacturer to provide detailed test reports, including but not limited to pressure resistance test, waterproof test, corrosion resistance test, etc., to verify the safety performance of the product.
DT15 Series｜Rubber Safety Mats｜DADISICK
Detection method: pressure sensing method
Maximum allowable dynamic load: impact load<800kg/cm²
PVC anti slip surface layer: anti slip grade R9
Encapsulation and Surface Protection: PVC, CR
Response time: 13ms
Power consumption: <20kg
Maximum allowable dynamic load: impact load <800kg/cm²
Mechanical life: ＞3,000,000 times
Safety Mat Installation and Maintenance
1. Installation Requirements
Understand the installation requirements of the pressure-sensitive safety mat to ensure that it can be installed correctly and achieve the expected protective effect. Care should be taken during installation to avoid damage to the safety mat and the circuit system.
2. Maintenance
Perform regular maintenance on the safety carpet, check its wear, circuit connection status, etc., and replace damaged parts in time to ensure long-term stable operation and safety of the safety mat sensor.
Conclusion
In conclusion, the selection of suitable industrial safety carpets requires a comprehensive consideration of actual application scenarios, material durability, safety performance, brand reputation and quality inspection standards. Through scientific and reasonable selection, installation and maintenance, the level of industrial electrical safety can be effectively improved, which can ensure the safe production of enterprises.
Related Hot Sale Safety Mat and Safety Edge
Safety carpet is a technology that monitors the pressure distribution on the carpet through pressure sensing.
Safety carpet is a technology that monitors the pressure distribution on the carpet through pressure sensing.
Safety carpet is a technology that monitors the pressure distribution on the carpet through pressure sensing.
Safety Edges is a technology that monitors the pressure distribution on the carpet through pressure sensing.
